Generate a free preliminary septic design for a parcel in Maricopa County: tank size, treatment, dispersal layout and a PDF spec sheet, sized against the Arizona rule set. No sign-in needed.
Of 1,751,155 Maricopa parcels we classified, 105,260 are on septic: 70,876 with a county septic permit on record and 34,384 developed parcels outside all mapped sewer service. 1,427,263 are on sewer.
A free preliminary design, not a permit plan. What you get is a planning draft: it is not permit-ready and it is not stamped. Installing or replacing a septic system still goes through your local permitting authority, which normally means a site and soil evaluation, and, where your jurisdiction requires it, plans from a licensed designer or engineer and installation by a licensed installer. Use the draft to understand what your lot probably needs before you pay for that work.
What the free design gives you
Tank size. Capacity and compartments, sized from the design flow for the bedroom count.
Treatment. Conventional septic where the inputs allow it, or advanced treatment where the rule set calls for it.
Dispersal layout. The dispersal type (trenches, beds or chambers) with trench count, length and spacing, drawn on your actual lot.
Drainfield area and reserve. The required absorption area and, where the rule set requires one, a reserve area kept clear on the plan.
Setbacks. The separations the layout holds to the house, property lines and wells.
A PDF spec sheet. A to-scale black and white sheet with the plan view, the parcel and a topography page, downloadable as a PDF.
Its assumptions, in writing. Every input the design had to assume is listed on it, and you can change any field.
What the design starts from here
In Maricopa County the generator starts from more than code tables. It uses the parcel's lot lines and building footprint, the bedroom count from the county septic permit on file when we hold one, and a percolation rate drawn from permits recorded in the same city when no site test is on file. Where a recorded as-built exists for the parcel, you can switch between the recorded system and the generated design and compare them.
How close it gets in Maricopa County
We tested the generator against 13,962 recorded Maricopa as-builts with a readable tank size (run 2026-06-29). The generated tank landed within one standard tank size of the recorded tank 89% of the time, and the treatment type matched 99.7% of the time. This is the only county where we have run that comparison, and a match with past permits is not a guarantee about your parcel.
What is recorded nearby
Recorded tank sizes by bedroom count
Bedrooms
Median recorded tank
Systems with a readable size
1
1,050 gal
858
2
900 gal
2,044
3
1,000 gal
5,919
4
1,250 gal
4,273
5
1,500 gal
1,337
6
2,000 gal
456
Recorded system types
Share of 82,746 recorded design documents, by the system type written on them.
System type
Share
Conventional, dispersal type not stated
61.9%
System type not stated
22.6%
Trench
7.8%
Other
3.8%
Chamber
2.1%
Seepage pit
1.4%
Recorded sizes reflect the rules in force when each system was permitted, and some are older systems. Use them as local context. The free design applies the current rule set, so it can come out larger than older systems nearby.
Designs for Arizona parcels are sized against Arizona Administrative Code, Title 18, Chapter 9, Article 3. Official text: Arizona DEQ onsite wastewater program. For who issues permits and who may design and install, see septic rules in Arizona.
How to get yours
Open the map and zoom to your property.
Click your parcel.
If no house outline appears, drag one onto the lot with the House tool. The generator sizes the system around the house, so it waits for one.
Click Auto-generate. Change the bedroom count, soil or system inputs if you know them.
Open the spec sheet and download the PDF.
No account or sign-in is needed to generate a design or download the sheet. Optional paid services offered inside the tool are separate from the free design.
Record counts last verified 2026-09-01. Parcel and design checks run 2026-11-19.
Common questions
Is the septic design really free in Maricopa County?
Yes. Generating a design for a parcel in Maricopa County and downloading its PDF sheet costs nothing and needs no account or sign-in.
Can I use this design to get a septic permit in Maricopa County?
No. It is a free preliminary design, a planning draft that is not permit-ready and not stamped. The permit process goes through your local permitting authority, normally with a site and soil evaluation and, where required, plans from a licensed designer or engineer.
Which rules is the Maricopa County design based on?
It is sized against Arizona Administrative Code, Title 18, Chapter 9, Article 3. Local requirements can add to the state rules, so confirm with your permitting authority.
How many properties in Maricopa County are on septic?
By our count 105,260 parcels: 70,876 with a county septic permit on record and 34,384 developed parcels outside all mapped sewer service.
What if my parcel shows no house?
Drag a house outline onto the lot with the House tool, then click Auto-generate. The generator sizes the system around the house.