Free septic design

Pick a parcel and get a free preliminary septic design: tank size, treatment, dispersal layout and a PDF spec sheet, sized against your state's rule set and drawn on your real lot. No sign-in needed. It works in 18 states today.

Open the free design tool  Book a demo call

18
states with a free design
647
counties on the map
105,260
Maricopa parcels on septic
89%
Maricopa tanks within one size
A free preliminary design, not a permit plan. What you get is a planning draft: it is not permit-ready and it is not stamped. Installing or replacing a septic system still goes through your local permitting authority, which normally means a site and soil evaluation, and, where your jurisdiction requires it, plans from a licensed designer or engineer and installation by a licensed installer. Use the draft to understand what your lot probably needs before you pay for that work.

What the free design gives you

How it is made

The generator draws on the parcel itself: its lot lines and, where we hold one, its building footprint. It sizes the system with a rule set written for your state, and it lists every input it had to assume so you can correct it. How much local record data feeds the design depends on where you are:

How close it gets

We tested the generator against 13,962 recorded as-builts in Maricopa County (run 2026-06-29). The generated tank landed within one standard tank size of the recorded tank 89% of the time, and the treatment type matched 99.7% of the time. We have not run that comparison in other states yet, so we do not quote accuracy for them.

Where it works

StateCounties on the mapRule set
Arizona15Arizona Administrative Code, Title 18, Chapter 9, Article 3
Colorado335 CCR 1002-43 (Colorado Regulation No. 43)
Florida8Chapter 62-6, Florida Administrative Code (formerly 64E-6)
Idaho44IDAPA 58.01.03
Iowa96567 Iowa Administrative Code, Chapter 69
Maine1210-144 CMR Chapter 241 (Maine Subsurface Wastewater Disposal Rules)
Michigan7Michigan Criteria for Subsurface Sewage Disposal (1994)
Minnesota55Minnesota Rules, Chapter 7080
Nebraska83Nebraska Title 124 (Onsite Wastewater Treatment Systems)
New Mexico2220.7.3 NMAC (Liquid Waste Disposal and Treatment)
New York3410 NYCRR Appendix 75-A
North Carolina1715A NCAC 18E (Wastewater Treatment and Dispersal Systems)
Oregon17OAR Chapter 340, Division 71 (Onsite Wastewater Treatment Systems)
Tennessee87Tenn. Comp. R. & Regs. Chapter 0400-48-01
Texas130 Texas Administrative Code, Chapter 285
Vermont14Vermont Wastewater System and Potable Water Supply Rules (Environmental Protection Rules, Chapter 1)
Washington37WAC 246-272A (On-site Sewage Systems)
Wisconsin65Wis. Adm. Code ch. SPS 383 (Private Onsite Wastewater Treatment Systems)

Where it does not work yet

Alabama, Arkansas, Mississippi and South Carolina show parcels on our map, but the generator does not have their state rule sets yet, so a design there would not reflect that state's rules. We do not offer the free design in those states until it does. Ohio has a rule set in the generator but no counties on the map yet. Every other state's parcels are not on the map yet. Every state, county and place still has a page here with the septic rules, fees, records and companies we hold.

Every state, county and place

There is a page for all 3,134 counties and 31,333 cities and places in the country. Where the free design is live, the page opens the tool. Everywhere else it carries the septic rules and fees that apply, the county's records door and the septic companies we list, and says plainly that the design is not available there yet.

StateCountiesStatus
Alabama67on the map in 10 counties, no design yet
Alaska30rules and records only
Arizona15free design in 15 of 15 counties
Arkansas75on the map in 65 counties, no design yet
California58rules and records only
Colorado64free design in 33 of 64 counties
Delaware3rules and records only
District of Columbia1rules and records only
Florida67free design in 8 of 67 counties
Georgia159rules and records only
Hawaii5rules and records only
Idaho44free design in 44 of 44 counties
Illinois102rules and records only
Indiana92rules and records only
Iowa99free design in 96 of 99 counties
Kansas105rules and records only
Kentucky120rules and records only
Louisiana64rules and records only
Maine16free design in 12 of 16 counties
Maryland24rules and records only
Massachusetts14rules and records only
Michigan83free design in 7 of 83 counties
Minnesota87free design in 55 of 87 counties
Mississippi82on the map in 79 counties, no design yet
Missouri115rules and records only
Montana56rules and records only
Nebraska93free design in 83 of 93 counties
Nevada17rules and records only
New Hampshire10rules and records only
New Jersey21rules and records only
New Mexico33free design in 22 of 33 counties
New York62free design in 34 of 62 counties
North Carolina100free design in 17 of 100 counties
North Dakota52rules and records only
Ohio88rules and records only
Oklahoma77rules and records only
Oregon36free design in 17 of 36 counties
Pennsylvania67rules and records only
Rhode Island5rules and records only
South Carolina46on the map in 6 counties, no design yet
South Dakota66rules and records only
Tennessee95free design in 87 of 95 counties
Texas254free design in 1 of 254 counties
Utah29rules and records only
Vermont14free design in 14 of 14 counties
Virginia133rules and records only
Washington39free design in 37 of 39 counties
West Virginia55rules and records only
Wisconsin72free design in 65 of 72 counties
Wyoming23rules and records only

How to get yours

  1. Open the map and zoom to your property.
  2. Click your parcel.
  3. If no house outline appears, drag one onto the lot with the House tool. The generator sizes the system around the house, so it waits for one.
  4. Click Auto-generate. Change the bedroom count, soil or system inputs if you know them.
  5. Open the spec sheet and download the PDF.

No account or sign-in is needed to generate a design or download the sheet. Optional paid services offered inside the tool are separate from the free design.

Related

Common questions

Is the septic design really free?

Yes. Generating a design for a parcel and downloading its PDF sheet costs nothing and needs no account or sign-in. Optional paid services offered inside the tool are separate from the free design.

Is it a permit-ready or stamped plan?

No. It is a free preliminary design, a planning draft. Installing a septic system still goes through your local permitting authority, normally with a site and soil evaluation, and, where required, plans from a licensed designer or engineer and installation by a licensed installer.

What does the free design include?

Tank size and compartments, the treatment type, the dispersal type and layout drawn on your lot, the drainfield and reserve area, the setbacks it holds, and a to-scale PDF spec sheet. Every assumed input is listed and can be changed.

Where does the free septic design work?

In 18 states: Arizona, Colorado, Florida, Idaho, Iowa, Maine, Michigan, Minnesota, Nebraska, New Mexico, New York, North Carolina, Oregon, Tennessee, Texas, Vermont, Washington, Wisconsin. Each state page lists the counties on the map.

How accurate is it?

In Maricopa County, tested against 13,962 recorded as-builts, the generated tank landed within one standard size of the recorded tank 89% of the time. We have not measured accuracy in other states yet.

Why does it ask me to draw the house?

The system is sized and placed around the house. Where we hold no building footprint for a parcel, you drag a house outline onto the lot and then click Auto-generate.