Free Septic Design › Washington › Pierce County

Free septic design in Pierce County, Washington

Generate a free preliminary septic design for a parcel in Pierce County: tank size, treatment, dispersal layout and a PDF spec sheet, sized against the Washington rule set. No sign-in needed.

Open the free design tool for Pierce County  Book a demo call

200,696
parcels on septic
172,075
septic records held
55,153
recorded as-builts located

Pierce County's septic count combines recorded as-built permits with parcels outside the sewer service area.

A free preliminary design, not a permit plan. What you get is a planning draft: it is not permit-ready and it is not stamped. Installing or replacing a septic system still goes through your local permitting authority, which normally means a site and soil evaluation, and, where your jurisdiction requires it, plans from a licensed designer or engineer and installation by a licensed installer. Use the draft to understand what your lot probably needs before you pay for that work.

What the free design gives you

What the design starts from here

The parcel's lot lines, the building footprint where we hold one, the mapped soil type and loading rate for the parcel, and the recorded as-built for the parcel when we have located one. Where a recorded as-built exists you can compare it with the generated design.

What is recorded nearby

From 167,644 septic documents we hold for Pierce County (as of 2026-07-30).

Recorded tank sizes by bedroom count

BedroomsMedian recorded tankSystems with a readable size
11,000 gal259
21,000 gal728
31,000 gal2,489
41,000 gal539
51,100 gal138
61,125 gal70

Recorded sizes reflect the rules in force when each system was permitted, and some are older systems. Use them as local context. The free design applies the current rule set, so it can come out larger than older systems nearby.

The rule set it sizes against

Designs for Washington parcels are sized against WAC 246-272A (On-site Sewage Systems). Official text: Washington Legislature, official WAC text. For who issues permits and who may design and install, see septic rules in Washington.

How to get yours

  1. Open the map and zoom to your property.
  2. Click your parcel.
  3. If no house outline appears, drag one onto the lot with the House tool. The generator sizes the system around the house, so it waits for one.
  4. Click Auto-generate. Change the bedroom count, soil or system inputs if you know them.
  5. Open the spec sheet and download the PDF.

No account or sign-in is needed to generate a design or download the sheet. Optional paid services offered inside the tool are separate from the free design.

More for Pierce County

Other Washington counties

Klickitat · Lewis · Mason · Okanogan · Pend Oreille · Skagit · Snohomish · Spokane · Stevens · Thurston

Record counts last verified 2026-09-01. Parcel and design checks run 2026-11-19.

Common questions

Is the septic design really free in Pierce County?

Yes. Generating a design for a parcel in Pierce County and downloading its PDF sheet costs nothing and needs no account or sign-in.

Can I use this design to get a septic permit in Pierce County?

No. It is a free preliminary design, a planning draft that is not permit-ready and not stamped. The permit process goes through your local permitting authority, normally with a site and soil evaluation and, where required, plans from a licensed designer or engineer.

Which rules is the Pierce County design based on?

It is sized against WAC 246-272A (On-site Sewage Systems). Local requirements can add to the state rules, so confirm with your permitting authority.

Do you hold septic records for Pierce County?

We hold 172,075 septic and onsite wastewater records for Pierce County. The county records page lists where the county keeps them.

What if my parcel shows no house?

Drag a house outline onto the lot with the House tool, then click Auto-generate. The generator sizes the system around the house.